As far as radios are concerned we have been able to connect to anything that has an I/O port on the back (ie mobile and base radios) which offers us the following pin outs: PTT, Audio into the radio/repeater (Mod Audio), Audio recovered from the equipment (received audio), Ground, Busy line or COR (Used to inform the system of activity).

Please note however that many of the radios need specific config files to accompany them which we have here and will make available to you for existing radios. Alternatively we would be happy to provide radios to go with your Iconics system. These would be ready programmed to suit your frequency requirements and will already have the config files installed to ensure proper connectivity to your Iconics system as soon as you plug it in.

Pplease note this list is not exhaustive of the units we supply so if you don't see what you want here call us at +1 985 384 4100

Motorola GM340 VHF Motorola GM360 VHF Motorola GM380 VHF Motorola GM340 UHF Motorola GM360 UHF Motorola GM380 UHF Motorola DM3400 Digital Motorola DM3600 Digital		Icom IC-F5062 VHF Icom IC-F6062 UHF
		Kenwood TK-7180 VHF Kenwood TK-8180E UHF
Codan NGT SR Codan NGT SRX

Please bear in mind that we recommend you use a slave radio to provide an air interface to your current radio network. This makes it very simple to integrate the Iconics network and is not reliant on hard-wired links.

If the system you prefer is not currently listed here please call us to see if it is something that is being worked on. If not we can discuss which option you prefer, namely use one of the radios from the list above programmed to the same frequencies as your current systems, or we can obtain the radio you use and build a lead to suit.